EN

INTERACTIVE USER GUIDE · ARIA AURA / AS90R

Hear your kit's Auracast TV audio with Aria Aura.

Turn on your Venucast Auracast TV kit, then join or switch its broadcast with Aria Aura.

Start SetupFix a problem
Venucast Aria Aura wireless over-ear headphonesAuracast TV Kit

START SETUP

Join your kit broadcast.

Join or switch your kit broadcast

Turn Aria Aura on.

Hold the Play / Pause button for 5 seconds. The LED flashes orange while searching.

Stay near your kit transmitter. The LED becomes solid orange when joined.

Watch: turn Aria Aura on, then hold Play / Pause for 5 seconds to join or switch the kit broadcast.

Success: solid orange LED and your kit's TV audio plays.

FIX A PROBLEM

What do you see or hear?

Cannot join an Auracast broadcast
  1. Confirm the transmitter or venue broadcast is active.
  2. Hold Play / Pause for 5 seconds until orange flashes.
  3. Stay near the broadcast and wait for solid orange.

Repeat the 5-second search near the kit transmitter.

Connected, but there is no sound
  1. Start playback at the source.
  2. Raise the source and headphone volumes from low levels.
  3. Confirm the LED matches the active mode: solid orange for the kit broadcast.

If the LED is not solid orange, repeat the 5-second search near the kit transmitter.

REFERENCE

Power, charging, buttons, and indicators.

Charging

  • USB-C input: 5 V, 500 mA–2 A.
  • Solid red: charging.
  • LED off: fully charged.
  • About 2.5 hours to charge.
  • Up to 35 hours playtime.

Watch: connect USB-C power and check the charging indicator.

Connection indicators

  • Orange flashing: searching for Auracast.
  • Solid orange: Auracast joined.

Full button guide

See the official function table for media controls, calls, EQ modes, Auracast searching, and indicator behavior.

Aria Aura earcup controls and button locationsOpen buttons & indicators ↗

FIRMWARE UPDATE

Check for Aria Aura updates.

Firmware may provide fixes or improvements. Use only the official Aria Aura update page and follow the instructions shown there.

1

Download the updater

Open the official page and install Avantree Firmware Updater for Windows 10 or later, or macOS 10.14 or later.

2

Connect Aria Aura

Disconnect the headphones from other devices, then connect them to the computer with a USB data cable.

3

Complete the update

Follow the updater instructions and keep the headphones connected until completion is confirmed.

Open Aria Aura firmware updateNotify me about updatesView the official guide →

During an update: do not turn off or disconnect Aria Aura, and keep it disconnected from all other devices until completion is confirmed.

STILL NEED HELP?

Get the right help for Aria Aura.

For the fastest answer, choose Aria Aura / VHS-AS90R in the support form.

RECOMMENDED

Submit an Aria Aura support ticket

Add the connected-device model, symptom, LED pattern, and photos or screenshots when useful.

Start support request →